Coyote Billet Heater Hose Adaptors

If your Coyote Swapped ride has a vented cap on the radiator, then you have the option to omit and delete the Coyote Degas bottle from the cooling system. Our billet heater hose adaptors help accomplish this by eliminating a port that is not used when eliminating the hoses that connect to the degas bottle. These aluminum tubes are designed to replace the oem steel hot water tubes that feed the degas bottle while keeping the heater hoses.  The barb version are cnc machined to accept a 5/8″  and a 3/4″ heater hose for the driver side fitting and 5/8″ on the passenger side fitting with the factory restriction built into the design. We also offer a -10AN version that allows the use of AN fitting style heater hoses found with some aftermarket heater cores.

If you are running a radiator that does not have a pressure relief cap, this is not for you.

Since the oem heater hoses will not work with the updated tubes, we offer a set of  heater hoses that have 48″ legs with a built in 90% bend. The Heater hose kit also comes with hose clamps as well. Three hoses are included, two 5/8″ and one 3/4″.

We also offer a modified upper water neck that comes with a bleeder screw. The oem neck has a nipple that also interacts with the reservoir that will not be needed. In the case you will not be removing or replacing that nipple, make sure it is capped off.

Compatible with all 3 Generations of Coyote engines both Mustang and F150